PB-IN-100HF_W3PB-IN-100HF_W3
PB-IN-100HFA

Quad Photoelectric Beam Sensor


Features

4 SYNCHRONIZED HIGH POWER INFRARED [PATENTED]

* 4 beams are “and-gated”, which helps to prevent false alarms from falling leaves and small animals.
* The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
* External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.

FOUR FREQUENCIES SELECTIONS

4 separate choices of frequency avoid cross-talk.

BEAM TRANSMISSION STRENGTH SELECTION

2 levels of beam transmission strength which can be set to suit the protection distance.

EASY BEAM ALIGNMENT

* Audible signal for alignment [Utillty model]
An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level.
* Sensitivity attenuation LED
Lights when beam level is attenuated, which shows low sensitivity.
* Monitor jack output
* Target color
* Wide adjustment (horizontally ±90°,vertically ±10°)

RoHS CERTIFIED COMPLIANT

Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

AUTO-GAIN LOCK

Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Aut-Gain lock is easily confirmed by sound check.

PROGRAMMED AGC

Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.

ALARM MEMORY

Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.

PROTECTION AGAINST FROST/DEW

As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

ENVIRONMENTAL MODULE BUILT-IN

Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.

OTHER FEATURES

* Tamper output (transmitter and receiver)
* Polycarbonate cover excellent at anti-shock
* Optional accessories

Specification

Model PB-IN-100HFA
Detection system Near infrared beam interruption system
(TR.-RE. 4 beams simultaneous interruption)
Infrared beam Double modulation pulsed beams by LED
Protection distance Outdoor 330′ (100m) or less
Max. arrival distance Tenfold 3300′ (1000m)
Response time 50msec. to 700msec. variable (Standard : 50msec.)
Power supply 12V to 30V DC (non-polarity)
Current consumption 70mA or less at protection (max. 105mA or less)
Alarm output Dry contact relay : NO or NC (selectable)
Reset : Interruption time + off-delay (approx. 1.5sec)
Contact capacity: 30V (AC/DC) 1A or less
Enviromental output Dry contact relay : NO or NC (selectable)
Contact operation : Output when weather condition gets worse
Contact capacity: 30V (AC/DC) 1A or less
Tamper output Dry contact relay : NC
Contact operation : Output when receiver cover is detached
Contact capacity: 30V (AC/DC) 0.1A or less
Alarm LED Red LED (receiver) lights when an alarm is intiated
Sensitivity attenuation LED Red LED (receiver) lights when beam reception is attenuated
Functions Modulated beam frequancy selection, Tone indicator,
Environmental module,Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack.
Beam adjustment Horizontal : +/-90°, Vertical : +/-10°
Ambient temperature range -31F to +151F (-35C to +66C)
Mounting position Outdoor (IP55)
Wiring Terminals
Weight Transmitter : 42oz (1200g)
Receiver : 45.5oz (1300g)
Appearance Resin (wine red)

Download