จุดเด่น
- Battery (2x AA type-3 alkaline) or DC Operation
- External Output to a Security System
- Variable Response Timer
- Built-in Alarm Sounder
- Compact Design
- Low Battery Warning
- Battery Check Function
อุปกรณ์ตรวจจับเปลวไฟ
The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.
คุณลักษณะ
| Detection system | Ultraviolet rays detection |
| (detected wave length 180~260nm) | |
| Detection distance | 10m (33ft) max. (7cm flame) |
| Detection angle | Approx. 120 degrees (conically) |
| Detection timer | 3 steps changeover by slide switch |
| H (0.2 sec), M (1 sec), L (6 sec) | |
| Power supply | Type-3 alkaline battery (LR6) x2 (3V) – included |
| Lithium battery (CR17450E-R-2-CM2) x1 (3V) – optional | |
| External power supply 9V to 30VDC with polarity | |
| Power consumption | Standby: 50μA max. (battery) / 5mA (DC) |
| Alarm: 50mA max. when buzzer sounds | |
| LED (red) | LED alarm: blinking every 0.2 sec during off-delay 10 sec |
| Low battery: light on 0.1 sec every 5 sec. | |
| Buzzer | Alarm: intermittent every 0.2 sec during off delay 10 sec |
| Low battery: sound 0.1 sec every 5 sec. | |
| Volume: 80dB or more 1m (3.3ft) ahead | |
| (silent setting is available by cutting internal jumper line) | |
| Wiring | Terminals |
| Ambient temperature | -10°C to +60°C (+14°F to +140°F) |
| (battery performance may decrease below 0°C and above 40°C | |
| Installation | Indoor (ceiling or wall mount) |
| Weight | Approx. 200g (7oz) |
| Appearance | ABS resin (white) |
| Supplied accessories | · Battery case (Type-3): 1pc |
| · Type-3 alkaline battery (LR6): 2pcs | |
| · Sensor locking screw: 1pc | |
| · Tapping screw: 2pcs |
